Directions for Use

BEFORE USING GasGrab™, THE OPERATOR MUST BE FIT AND ABLE TO HANDLE THE LOAD HE/SHE IS ATTEMPTING TO LIFT

1. Ensure that the words “THIS WAY UP” are facing upwards.
2. Rotate the handles of the GasGrab™ downwards into the open/clearance position.
3. Lower the GasGrab™ downwards over the cylinder until it reaches a safe lifting point.
• SAFETY ADVICE: The safest clamping point to lift a cylinder from is with the GasGrab™ clamped above the centre point of the vertical cylinder body.
  This stabilises the cylinder's balance when being moved.
4. Pull both handles of the GasGrab™ upwards, this will cause it to clamp onto the cylinder body.
• REMEMBER: If you relax your upward pressure on the GasGrab™, it will relax its grip and may slide down the cylinder body, so always lift with both GasGrab™ handles at the same time.
5. Using a safe lifting technique, raise the cylinder from the floor.
   • ! When using a team lift, ensure that one person is in overall control of the lift.
6. Carefully move the cylinder to its setting down point.
   • ! Ensure that the setting down point is clear of obstructions. Place the cylinder down, maintaining control at all times.
7. Remove the GasGrab™ by releasing your upward pressure and slide the GasGrab™ up and off the cylinder.
8. Secure the cylinder to ensure it cannot topple over and fall.

Don’t be a statistic!
Get a grip – Get a GasGrab™.